Temperature, humidity and pressure regulator H3531

Comet System
  • Outputs: 2xRelay, Ethernet
  • Space, duct, bar and cable types
  • Dual line LCD
  • Long term stability of parameters
  • Easy programming, adjustment, calibration

Description

Humidistats are designed for two-state control of e.g. heating, ventilation, humidifier, dehumidifier, etc.Transmitter is equipped with two relay outputs for alarm indication or control of external devices. Each relay can be assigned to any measured or computed value. For each relay setting of delay, hysteresis, audible alarm is enabled.Measured values are converted to galvanically isolated RS485 serial output or RS232 output.

Wireless data acquisition system via GSM can be built easily with Comet software package Database Sensor Monitor. Fully equipped transmitter contains temperature, humidity, pressure sensors. Measured temperature and relative humidity is recalculated to other humidity interpretations - dew point temperature, absolute humidity, specific humidity, mixing ratio or specific enthalpy. Reading and pressure output are available in these units: hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in2.Degrees Celsius and Fahrenheit are user selectable. 

Parameters are easy adjustable from regulator keyboard or from the computer. State-of-the-art  capacitive  polymer  sensor  ensures  excellent  calibration  long term  stability,  inertia  against  water  and condensation. Transmitter is designed for use in non-aggressive environment.

Transmitter is also equipped with three binary inputs for detection of two-state events - e.g. water, smoke, glass break detection, door contact. Transmitter is equipped with internal terminals for powering of connected external detectors.

Specifications

Maximum switching voltage, current of relay output
50V, 2A, 60VA, resistive load
Audible alarm
from built-in beeper - switchable
Range of relative humidity measurement
0...100%
Operating temperature range of case with electronics
-30...+80°C
Range of temperature compensation of RH sensor
-30...+125°C
Filtering ability of sensor cover
0.025mm (air filter from stainless steel mesh)
Power
9...30Vdc
Protection
IP65/IP54 electronics with terminals, IP40 humidity and temperature sensors.

Documents